Explosion Proof 2-Wire Temperature Transmitter FuzyPro 8080TR

Explosion Proof 2-Wire Temperature Transmitter FuzyPro 8080TRThe FUZYPRO 8080TR is a Digital, PC programmable, galvanicaly isolated explosion proof universal input 2-wire smart temperature transmitter. The explosion proof universal input 2-wire smart temperature transmitter FuzyPro 8080TR converts 13 types of thermocouple sensors; 12 types of RTD sensors, configured as 2, 3 and 4 wires; potentiometer, resistor and millivolt inputs into process current loop. A 24 bit A/D converter is the heart of this outstanding performance.

 

The FUZYPRO 8080TR Universal input Smart transmitters are designed for use in process industries where vibration, inclement weather and corrosive atmospheres prevail. The electronics are enclosed in a copper-free epoxy coated Aluminum housing and for more aggressive environments, a SS316 housing is optionally available. The housings meet the requirements of NEMA 4X & IP68, and are also certified Explosion Proof by FM/CSA/ATEX/IECEx.

 

Exceptional digital accuracy of typical +/-0.1ºC is provided for all the sensors regardless of the calibrated span. Extremely accurate cold-junction temperature measurement provides precise compensation throughout the entire ambient range. The unit also accurately measures and compensates the RTD sensor leads in the 3-wire connection. The Transmitter can be set and wired to perform differential measurement conversions of temperature sensors as well as mV sources.

 

  • INPUTS: THERMOCOUPLE, RTD, OHM AND MV

  • HIGH ACCURACY

  • 2 WIRES, 4-20MA OUTPUT

  • EXCELLENT STABILITY

  • HIGH EMI-RFI IMMUNITY

  • CONFIGURABLE BY PC COMMUNICATOR

  • INPUT/OUTPUT ISOLATED

  • 4 DIGIT LED DISPLAY

  • EXPLOSION PROOF CERTIFIED

  • 3 YEAR WARRANTY

 

The Transmitter is fully configurable by connecting to a PC with no external power supply required. The configuration parameters are stored in a non volatile memory. Digital output data can be obtained via a communication port located on the front panel. Continuous, average and max/min readings can be monitored.

 

Detection of sensor breakage or disconnection of input leads, forces the output to a pre-defined up/down scale value. The unit continuously monitors the sensor and automatically returns to normal operation mode when the sensor is recovered.

 

FuzyPro 8080TR Brochure


 


Heaters Controls And Sensors Products