DC Hall Effect Current Transducers CR5210/5220

DC, Hall Effect, Current Transducers, CR5210, CR5220The CR5210/5220 Series, DC Hall Effect Current Transducers are designed to output a DC signal which is proportional to a DC current input signal. These devices are designed for direct current only, targeting them towards general and daily applications.

 

Wire Mounted Current Indicator
Wire Mounted Current Indicator
Wire Mounted Current Indicator
  • Non-contact DC current sensing
  • Closed loop sensing for accuracy
  • 0 - 5 Vdc or 4 - 20 mA DC outputs
  • Connection diagram printed on case
  • DIN rail or panel
  • Thermal Drift: 500 PPM/C
  • Calibration: RMS
  • 4-20 mA DC - 0-300 ohm Output
  • Operating Temperature: 0°C to +50°C
  • Response Time: 250 ms
  • Insulation Voltage: 2500 VDC
  • MTBF: Greater than 100 K hours
  • Supply Voltage: 24 VDC
  • Frequency Range: DC
  • Output Load: 0-5 VDC - 2 K or greater
  • Basic Accuracy: 1.0 %
  • Power supply management
  • DC motor drives
  • Battery chargers and systems
  • Mobile applications
CR Magnetics Current Transducer Catalog
CR Magnetics Current Transformer Catalog
CR Magnetics Commercial & Metering Class Current Transformers

 


 


Heaters Controls And Sensors Products