Split Core Current Transducers CR4110/20S

Split Core, Current Transducers, CR4110, CR20SThe CR4110/20S Series provide True RMS sensing of the current waveform. True RMS is recommended when sensing current waveforms that are variable frequency, chopped up, or non-sinusoidal in general.

 

Wire Mounted Current Indicator
Wire Mounted Current Indicator
Wire Mounted Current Indicator
  • 35mm DIN Rail or Panel Mount
  • Available with analog 4-20 ma or 0-5 Vdc outputs
  • 24 Vdc powered
  • Use with external current transformers
  • Highest precision available
  • Connection diagram printed on case
  • Basic Accuracy: 1.0%
  • Calibration: True RMS Sensing, Average RMS, DC
  • Thermal Drift: 500 PPM/°C
  • Operating Temperature: 0°C to +60°C
  • Installation Category: CAT II
  • Polution Degree: 2
  • Insulation Voltage: 2500 Vdc
  • Altitude: 2000 meter max.
  • Frequency Range: DC, DC to 4KHZ, 20 Hz - 5 KHz
  • MTBF: Greater than 100 K hours
  • Cleaning: Water-dampened cloth
  • Supply Voltage: 24 Vdc ±10%
  • Output Load: 4-20 mA dc - 0 to 300 W, 0-5 Vdc - 2K W or Greater
  • Response Time: 250 ms max. 0-90% FS (0.25 ms for CR5410S)
  • Relative Humidity: 80% for temperatures up to 31°C and decreasing linearly to 50% at 40°C
  • Directly connect to PLC
  • Sense motor stalls and short circuits
  • Industrial instrumentation
  • Process control loops
  • Phase Fired Controlled Heaters
CR Magnetics Current Transducer Catalog
CR Magnetics Current Transformer Catalog
CR Magnetics Commercial & Metering Class Current Transformers

 


 


Heaters Controls And Sensors Products