The CR4210 and CR4211 Current Transducers are self powered. These transducers are calibrated to provide a 0-5 VDC and 0-10VDC signal that is proportional to the average RMS input AC current. Designed for multi-point current sensing, these devices provide excellent features in a high value package.

Relatively low cost DIN rail or panel mount Interfaces with most commercially available instrumentation Connection diagram printed on case	Supply Voltage: 24 Vdc ±10% Output Load: 4-20 mA dc - 0 to 300 W, 0-5 Vdc - 2K W or Greater Thermal Drift: 500 PPM/°C Cleaning: Water-dampened cloth MTBF: Greater than 100 K hours Frequency Range: DC, DC to 4KHZ, 20 Hz - 5 KHz Altitude: 2000 meter max. Insulation Voltage: 2500 Vdc Relative Humidity: 80% for temperatures up to 31°C and decreasing linearly to 50% at 40°C Polution Degree: 2 Installation Category: CAT II Operating Temperature: 0°C to +60°C Response Time: 250 ms max. 0-90% FS (0.25 ms for CR5410S) Calibration: True RMS Sensing, Average RMS, DC Basic Accuracy: 1.0%	Multi-point current sensing and control panels Monitor motor faults Monitor heating elements Monitor lighting elements